c - Gearbox
protection plate
|
|
On vehicles with 1.6 l
engine bolt the web in the centre of the plate to the gearbox. d - Protection plate for
drop arm |
|
|
|
|
Note: |
See Drawing 6 for
dimensions |
|
On vehicles with 2.0 1
engine: do not weld web (arrow). |
|
|
Installation of the
protection plate |
Installation of the
protection plate |
|
|
|
|
Unscrew both nuts
attaching engine to gearbox. Loosen front gearbox mounting at the bottom and
position protection grille. Make shouldered nuts for rear attachment. |
Position protection
plate in the vicinity of the drop arm, mark position of attachment holes in
floor pan and on bumper and drill holes (8.5 mm dim.). Loosen floor pan,
insert M 8 x 15 bolt from above and secure plate. |
|
|
|
|
|
|
See Drawing 5
for dimensions
